Film Squeezing Pelletizing Dryer

The plastic film squeezing pelletizing machine is used for drying washed films , woven bags,PP Raffia bags, PE film etc and make the washed films to be like granulates. The plastic film squeezer can work on the accordance with washing and pelletizing line with stable capacity and whole process automation to save labor cost. The plastic film squeezer can be applied for: ■ LDPE waste film recycling and washing line ■ PE Agricultral film crushing and washing line ■ Waste PE Film recycling line ■ Ethylene ground film washing, drying and regranulating line ■ PP Woven bag/raffia bag recycling and washing line

Model	LDSD-270	LDSD-300	LDSD-1000
Capacity	300kg/h	500kg/h	1000kg/h
Motor power	55kw	90kw	132kw
Gearbox	Hard face gear box	Hard face gear box	Hard face gear box
Screw diameter	270mm	320mm	350mm
	Screw material: 38CrMoAlA
	The screw is with casting finishing.
	Surface cover resistance to wear material.
Screw length	1300mm	1400mm	1560mm
Rotating speed	87rpm	87rpm	87rpm
Pelletizing motor power	3kw	4kw	5.5kw
	Inverter control
Pelletizing blades Qty	3pcs	3pcs	4pcs
Final moisture	1-2%
Water Drain system	With the water drain system in the bottom

>>Film squeezing pelletzing dryer---LIANDA Design adopts the principle of screw extrusion&dehydration.The motor drives the reducer, and the high torque of the reducer drives the spiral rotation, the soft plastic will be screw pressed during the conveying pushing process. Then The water will be removed and achieve dehydration. >>The plastic film squeezer can remove almost 98% water from washed film efficiently. The corn part is the screw surrounded by filter screen mesh which will push the material forward under strong pressing and squeezing power,the water will filtered out fast. >>The heating system: one is from self-friction power, another is from auxiliary electric heating. The heating system will semi-plasticied the washed film and extruded out from the mould. There are the pelletizing blades installed beside the mould,the semi-plasticied film will be cut by speed pelletizing blades. Finally the cutted pellets will be cooled by air and transmit to cyclone silo. >>The screw barrel is made of material feeding barrel, compressing barrel and plasticized barrel. After feeding, squeezing , the film will be plasticized and cut to particle by the pelletizer which is installed besides the moldSince Film is easily to be wrapped and difficult to be de-watered, we adopt the design of variable screw distance to get ■ Uniform feeding without stuck ■ Make water removing more than 98% ■ Less energy cost ■ Easily for feeding the particle to the extruder and enlarge the capacity of the extruder ■ Stable the quality of finished particle

■ In order to ensure the accuracy of each part, we are equipped with a variety of professional processing equipment and we have accumulated professional processing methods over the past years. ■ Each component before assembly needs strictly control by inspecting personnel. ■ Each assembly is in charged by a master who has working experience for more than 20 years ■ After all the equipment are completed, we will connect all the machines and run the full production line to ensure the stable runnin

Products Details

Featured Products

Contact us