Raw Material | PET Resin CR-BrightFor food package | |
Using Machine | LDHW-600*1000 | |
Initial moisture | 2210ppmTested by German Sartorius Moisture test instrument | |
Drying Temperature set | 200℃ | |
Drying time set | 20mins | |
Final moisture | 20ppmTested by German Sartorius Moisture test instrument | |
Final product | Dried PET Resin no clumping, no pellets sticking |
1 | Low energy consumption | Significantly lower energy consumption compared to conventional processes, through the direct introduction of infrared energy to the product | |
2 | Minutes instead of hours | The product remains for only a few minutes in the drying process and is then available for further production steps. | |
3 | Instantly | The production run can start immediately upon startup. A warm-up phase of the machine is not required. | |
4 | Gently | The material is heated gently from the inside to the outside and not loaded from the outside for hours with heat, and thereby possibly damaged. | |
5 | In one step | Crystallization and drying in one step | |
6 | Increased throughput | Increase of plant throughput by means of reduced load on extruder | |
7 | No clumping, no sticking | The rotation of the drum ensures constant movement of the material.The spiral coils and mixing elements designed for your product ensure an optimal mix of material and avoids clumping. The product is evenly heated | |
8 | Siemens PLC control | Control.The process data, such as material and exhaust air temperature or fill levels are continuously monitored by means of sensors and pyrometers. Deviations trigger automatic adjustment.Reproducibility.Recipes and process parameters can be stored in the controlling system to ensure optimal and reproducible results.Remote maintenance.Online service via modem. | |
9 | Drying time only needs 20mins, final moisture can be ≤ 30ppm | The infrared rays that penetrate and reflect from the material do not affect the organization of the material, but the absorbed tissue will be converted into heat energy due to molecular excitation, which causes the temperature of the material to rise. | |
10 | No clumping, no sticking | The rotation of the drum ensures constant movement of the material.The spiral coils and mixing elements designed for your product ensure an optimal mix of material and avoids clumping. The product is evenly heated | |
11 | Easy clean and change material | Good access to all components allows for easy and fast cleaning.Rapid product change-over. |